All of the ionization blow off guns from ElectroStatics, Inc
work with compressed air or Nitrogen.

 

The 190M Gun is specifically designed and manufactured to meet stringent clean room (<class 100 or ISO 3-4) operating conditions while reducing static electricity at the work station. The 190M should only be used with dry nitrogen or extremely clean air.

 The nozzle assembly is a specially designed housing containing a 0.45 micron, non-absorbing, replaceable filter between two rigid stainless steel screens. "O" rings prevent any possibility of particulate bypassing the filter. The housing containing the filter and ionizing point is constructed of stainless steel and molded Teflon parts. This unique design eliminates any possibility of contamination from the gun itself passing through to contaminate the product. The filter is not designed to clean/ filter the pressurized air or inert gas but to capture any contamination that may come from the gun itself. Filter replacement on the gun is quick, easy and requires no tools. 

The Model 190C Ionizing Gun is specifically designed for neutralizing static and removing surface contamination for applications in rooms class 100 or ISO 3-4 or higher and general applications. For example, cleaning plastic parts prior to assembly, cell phone repair, fiber optics, neutralizing nonconductive components prior to their assembly into a printed circuit board. 

The Model 190 HP Ionization Gun is highest volume ionization gun on the market. The 10 to 1 boost from the venturi also makes The 190 HP a very energy efficient static control blow off gun. The 190 HP is an excellent ionization blow off gun for applications with: a large coverage area such as fiberglass panels; drying of circuit boards, cooling requirements. Air flow requirements with 0.25 fittings @ 20 PSI 3 CFM; @ 50 PSI 4.5 CFM; @100 PSI 6 CFM

 The CPS Ionizing Air Gun is a high-performance ionization source, designed to simultaneously neutralize static charges and remove electrostatic bonded particulate from surfaces. The CPS Gun provides a pinpoint, ionized airstream ideal for cleaning, medical components, instruments, molded parts, photographic film, glass and other electrostatic charged components. 

The HPS-II Hands Free Ionizing Air Gun is is designed to offer the operator the ease of use without having to hold the gun. The HPS-II hands free provides a pinpoint, ionized airstream ideal for cleaning, medical components, instruments, molded parts, cell phone repair, photographic film, glass and other electro statically charged components. The foot switch controls air flow to the gun. The goose neck assemble if easily adjustable to point the nozzle in the desired direction.

 

 

All powered static bars, guns and nozzles require the "T Series" Unit (to the left). These rugged power units automatically provide optimum performance never requiring adjustments. Two (2) bars, nozzles or guns can operate from one power unit. Where sensitive electronic components require the use of guns or nozzles, it is recommended the "B" Series (Balanceable Power Units) be used. With this unit, equal ion (5 v +/-) is assured. the "B" series power supply can power one gun.